The Haanjenn Comp isn’t confined to traditional rides. As our flagship women’s alternative road bike, it’s ready for long days of exploration on any surface.
Its carbon fork soaks up choppy bumps, and the slightly slack geometry of the aluminum frame, wide bars, and thru axles front and rear add up to the stability and control gravel riders seek. With a SRAM Apex 1 drivetrain and hydraulic disc brakes, smooth shifts and all-season control are always present, no matter how rough the going gets. High-volume Kenda tires on HED wheels are efficient enough for daily commuting yet have the durability to stand up to grand fondos and adventuring on mountain roads. It’s up to you: with the Haanjenn Comp, you can paint outside the lines.
Ready Ride bikes are shipped 95 percent assembled. Typical bike assembly is time-consuming and requires technical know-how. Ready Ride reduces the time and skills needed for the final, four-step assembly.
|Frame||DB Women's Alternative Road, Endurance Geometry, Relaxed Head Tube Angle, Fully Butted 6061-T6 Alloy, Formed Top Tube, Tapered Headtube, Disc Only, 142x12mm Thru-axle w/ Replaceable Hanger|
|Fork||DB Gravel Disc, Carbon Leg, 1.5" Tapered Alloy Steerer Tube, w/ 15mm Thru-axle|
|Headset||FSA NO.42, Sealed Cartridge for Tapered Headtube|
|Cranks||SRAM S350 X-Sync, w/ 44T Chainring|
|Bottom Bracket||SRAM GXP|
|Rear Derailleur||SRAM Apex 1, 11 Speed|
|Shifter||SRAM Apex 1, 1x11 Speed|
|Cogset||SRAM PG1130, 11 Speed, 11-42T|
|Chain||KMC X11EL, 11 Speed|
|Front Hub||24h Alloy HighLow Flange, Sealed Cartridge, CNC Disc Mount, 15mm Thru-axle|
|Rear Hub||24h Alloy HighLow Flange, Sealed Cartridge, CNC Disc Mount, 142x12mm Thru-axle|
|Spokes||14g Stainless Steel|
|Rims||HED Tomcat Disc, 24h, 21mm Internal Width, Tubeless Ready|
|Tires||Kenda Flintridge, 60TPI, 700x35c|
|Brakes||SRAM Apex 1 Hydraulic Disc, w/ 160mm Front / 140mm Rear Centerline Rotors|
|Brake Levers||SRAM Apex 1|
|Pedals||DB Laser Alloy Platform|
|Handlebar||HED Eroica, 7050 Alloy, 31.8mm Bar Bore|
|Grips||DB Gel Tape|
|Stem||HED Eroica, 6061 Alloy, 3D Forged, +/-7° Rise, 31.8 Bar Bore|
|Seat||DB Performance Womens Road|
|Seatpost||HED Eroica, 6061 Alloy, 27.2mm|
|Extras||Owner's Manual, Assembly Guide, Bottle Cages, Tool Kit|
|Bike Weight||22.7 lbs|
|Accessories||DB Women's Alternative Road, Endurance Geometry, Relaxed Head Tube Angle, Fully Butted 6061-T6 Alloy, Formed Top Tube, Tapered Headtube, Disc Only, 142x12mm Thru-axle w/ Replaceable Hanger|
|Bike Size||XS/47cm / Rider Height: 5'1" - 5'4"||S/50cm / Rider Height: 5'4" - 5'7"||M/53cm / Rider Height: 5'7" - 5'10"||L/56cm / Rider Height: 5'8" - 5'11"|
|Seat Tube Length||410mm||440mm||470mm||500mm|
|Stand Over Height||724mm||748mm||774mm||800mm|
|Top Tube Length||515mm||525mm||535mm||550mm|
|Head Tube Length||120mm||130mm||145mm||160mm|
|Chain Stay Length||430mm||430mm||430mm||430mm|
|Seat Post Length||350mm||350mm||350mm||350mm|
Customer Reviews Write Your Own
Great BikeReview by Chris
I bought this for my wife and she is enjoying climbing the 100's of miles of gravel roads in Western NC. I was looking for a female specific gravel bike with hydraulic brakes and decent components and could find very little without converting a men's bike. This fit the bill and was much cheaper than I was planning to spend.
I've ordered a number of bikes and this one came packed better than any I've seen. It came with a nice toolkit with basic tools, pedal wrench, a torque wrench and flat pedals that are above the norm in quality. The build adequate and required very little to set up, but did require minor drivetrain adjustments a few miles into the first ride, but that is normal for a factory built bike.
One note on the bike. The specs have the front axle listed as 15mm and it is actually a 12mm thru axle. (Shimano SM-AX720 100x12mm). Not an issue, but if you are ordering additional wheels, you'll need to ensure they support 12mm end caps.
I really don't think you can beat this bike for the price. I have a carbon gravel bike that cost nearly 3x as much and is < 2 lbs lighter and while it does ride better, but no where near 3x better. Plus, I suspect I can cut the weight difference in 1/2 for < $200.(Posted on 4/26/2017)