Overdrive Pro

The bike industry often sees fads come and go. Innovation doesn’t always assure success or even relevance for that matter. But the 29er revolution seems to be one that’s here to stay and for good reason.

There’s no denying the rock crawling, root crushing power of a larger wheel. Making the largest of obstacles the smallest of matters is a defining trait of these muddy beasts. By offering decreased rolling resistance, increased traction when cornering and improved ground clearance, one ride upon one of these massive behemoths is sure to sway even the staunchest skeptic.

Benefits of a 29” Wheel

  • Angle of Attack – Larger wheels decrease your angle of attack by allowing you to roll over obstacles easier and faster. Bigger wheel = smaller obstacle.
  • Momentum – A larger wheel enables one to carry momentum easier though obstacles.
  • Surface Contact – 29”wheels are less prone to sinking in soft material such as sand and mud due to the larger contact patch causing lower ground pressure. The longer contact patch increases cornering and straight line traction
  • Stability – The relative position of the bottom bracket/cranks to the axles in the wheels also means that your relative center of gravity is lower. This results in a feeling of riding “in” the bike rather than on top of it.
  • Tire Clearance – with more tire choices than any platform, the 29”wheel easily accommodates off road as well as commuting tires.
  • Taller Riders – 29" bikes tend to offer taller riders a more “natural” frame geometry.

The Diamondback Overdrive Pro takes 29ers to the next level. The newly revised 2012 6061-T6 Aluminum Overdrive series frames boast of newly formed top and down tubes, a machined headtube, and forged drop outs with a replaceable derailleur hanger. The matte finished frame with the gloss colored highlight on the top tube gives the frame a very “super car inspired” look and feel.

The Geometry is spot on. The ever so sloping top tube provides ample standover clearance. A 71° head tube angle and a 73° seat tube angle create the perfect XC/trail geometry. The 390mm (15.4 inch) chainstays equate to an extremely snappy rig and the ability to easily get the front wheel off the ground – something that not all 29ers can be so proud of.

The all new Fox 32 Float RL 29" gives you 100mm of open bath buttery travel. It also features rebound and lock out, a QR15 thru axle, a butted alloy steerer, and 32mm aluminum stanchions. The Shimano SLX front and rear derailleur and shifters make the going easy while the Shimano FCM552 Dyna-Sys 10spd Crankset with Shimano outboard bearing bottom bracket and replaceable rings 24/32/42t will give you all of the power you need to make it up and/or down any hill. While coming down you’ll greatly appreciate the Shimano Deore hydraulic disc brakes (w/ 180mm front / 160mm rear rotors ) as they will make stopping a breeze. Add in Weinmann SL-7 M-Series double wall rims with WTB Wolverine Race folding aramid bead and you can ride this bike over pretty much anything. Diamondback signature alloy handlebars, stem post and Race M-series saddle w/tubular cromo rails round out this package.

The 2012 Overdrive Pro is the king of the Overdrive series. Three other models are sure to offer the value and quality that you are looking for in a new 2012 Overdrive 29er.

Highlights:

  • Butted 6061-T6 Aluminum Overdrive 29r Frame
  • Fox Float 29” 100mm Fork w/15QR
  • Shimano SLX front, rear Derailleurs and Shifters
  • SL-7 Double Wall 29” Rims
  • Shimano Deore Hydraulic Disc Brakes w/XT rotors

Bike Specs

Sizes 16" Small  18" Medium  20" Large  22" XLarge 
Frame Overdrive 29" Butted 6061-T6 Aluminum w/ Formed Top / Down Tube, machined headtube, forged drop outs w/replaceable hanger, disc only
Fork FOX 32 FLOAT RL 29" 100mm travel, open bath, ext. rebound and lock out, QR15 thru axle, butted Alloy steerer, 32mm aluminum stanchions
Rear Shock N/A
Cranks Shimano FCM552 Dyna-Sys 10spd Crankset w/Shimano outboard bearing BB w/ replacable rings 24/32/42t
Bottom Bracket Shimano outboard bearing BB
F. Derailleur Shimano SLX top pull, down swing, 34.9
R. Derailleur Shimano SLX SGS 10spd
Shifter Shimano SLX 10spd Rapidfire
Brake Levers Shimano Deore M505 radial w/ hinge clamp, reach adj.
Brakes Shimano Deore Hydraulic Disc w/ XT 6-bolt, 180mm frt / 160mm rear Rotors
Cassette Shimano HG81 SLX 10spd Cassette (11-36t)
Rims 32h Weinmann SL-7 M-Series Doublewall
Tires WTB Wolverine Race folding Aramid bead 29x2.2
Pedals Shimano 520 Clipless
Handlebar DB Lazer Series 31.8mm low rise
Stem DB AL6061 Ahead 7° 31.8mm
Seatpost DB Lazer Series Micro Adjust 30.9mm
Seat DB Race M-series saddle w/tubular cromo rails
Headset Integrated FSA Drop-in ACB upper, Zero Stack lower internal cup and cartridge bearing, 1 1/8"
Colors White
Chain Sram PC-1031 10spd
Hubset (F) 32h QR15 Alloy w/ CNC Disc Mount (R) 32h SL-7 Alloy Cassette w/ CNC Disc mount
Spokes Black 14g Stainless Steel
Grips DB4L 135mm Kraton
Extras DB Key Chain, Owner’s manual, H20 bottle mounts, Clear Coat, 3 extra inches of wheel diameter!
Note Specifications Subject to Change

Geometry

Size 16" Small 18" Medium 20" Large 22" XLarge
Seat Tube Length ** 16.0" 18.0" 20.0" 22.0"
Standover Height 29.5" 30.0" 31.5" 32.75"
Top Tube Length * 22.0" 23.5" 24.5" 25.5"
Head Tube Length 95.0mm 105.0mm 120.0mm 135.0mm
Head Angle 71.0° 71.0° 71.0° 71.0°
Seat Angle 73.0° 73.0° 73.0° 73.0°
Wheel Base 1062.0mm 1091.0mm 1112.0mm 1131.0mm
Chain Stay Length 440.0mm 440.0mm 440.0mm 440.0mm
Fork Offset 38.0mm 38.0mm 38.0mm 38.0mm
BB Height 313.0mm 313.0mm 313.0mm 313.0mm
Stem Length 70.0mm 70.0mm 90.0mm 90.0mm
Handlebar Width 670.0mm 670.0mm 670.0mm 670.0mm
Crank Length 170.0mm 175.0mm 175.0mm 175.0mm
Seat Post Length 350.0mm 350.0mm 350.0mm 350.0mm
* Measured Horizontally ** Measured from Center

Size Finder

Bike Type

Gender

Measurement Units

Back

Based on your input...

Your Bike size is:

Back